Spacer clips allow you to align the floor while ensuring perfect joint spacing between tiles.
The custom length of the clips allows you to install thick tiles.
The clip is designed so that it always breaks off just above the base.
By using only pure new plastic granules, the quality is very stable.
The Helix – Spacer Clips Long (15-25mm tile thickness) are suitable for different tile thicknesses.
Our range can be obtained in:
– 250 clips
In addition, our clips are suitable for joint widths:
– 2 mm
The clips are suitable for tiles with a thickness between 15 and 25 mm. Also for tiles with a thickness of 12-15 with the wedge separator.
The number of Leveling clips and caps required depends on the size of the tiles. In the tab “Consumption table” you will find the consumption advice.
Through the App calculator you can have it calculated how many clips you need in function of the tile size and the area to be tiled.
After applying the tile adhesive, the clips are slid under the tile. Depending on the size of the tile, place one or more clips per side. Tap the tile.
Place the next tile after you applied spacers.
*Depending on tile size, it may be necessary to use multiple spacers on each side.
*For tiles of about 20 cm, the use of two spacers per side is recommended.
By hand, screw the caps onto the clips that were slid under the tiles.
Turn the cap all the way to the end and tighten it to level the tile.
After this fixing, allow a drying time of 24 hours !
Once the tile adhesive has fully cured, the clip and cap can be removed. To do this, break the clips with a hammer or with your foot in the direction of the joint.
The caps can be reused by unscrewing them from the clip.
The number of Levelling clips and caps required depends on the size of the tiles. See the consumption recommendation below.
Or download our App calculator to calculate how many clips you need according to tile size and area to be tiled.
The Helix – Spacer Clips Long (15-25mm tile thickness) are suitable for different tile thicknesses.
Our range can be obtained in:
– 250 clips
In addition, our clips are suitable for joint widths:
– 2 mm
The clips are suitable for tiles with a thickness between 15 and 25 mm. Also for tiles with a thickness of 12-15 with the wedge separator.
The number of Leveling clips and caps required depends on the size of the tiles. In the tab “Consumption table” you will find the consumption advice.
Through the App calculator you can have it calculated how many clips you need in function of the tile size and the area to be tiled.
After applying the tile adhesive, the clips are slid under the tile. Depending on the size of the tile, place one or more clips per side. Tap the tile.
Place the next tile after you applied spacers.
*Depending on tile size, it may be necessary to use multiple spacers on each side.
*For tiles of about 20 cm, the use of two spacers per side is recommended.
By hand, screw the caps onto the clips that were slid under the tiles.
Turn the cap all the way to the end and tighten it to level the tile.
After this fixing, allow a drying time of 24 hours !
Once the tile adhesive has fully cured, the clip and cap can be removed. To do this, break the clips with a hammer or with your foot in the direction of the joint.
The caps can be reused by unscrewing them from the clip.
The number of Levelling clips and caps required depends on the size of the tiles. See the consumption recommendation below.
Or download our App calculator to calculate how many clips you need according to tile size and area to be tiled.
